Summer 2017, Day 3: Shabbos in Wisconsin

Trish photographed the RV this morning:

Summer2017_Day03_001

Summer2017_Day03_002

We left the Walmart in Van Wert, Ohio, and continued west into Indiana:

Summer2017_Day03_003

And on into Illinois:

Summer2017_Day03_004

And on into Wisconsin:

Summer2017_Day03_005

We’re spending Shabbos parked next door to Tricia’s sister’s house in a neighbor’s yard:

Summer2017_Day03_007

Tricia’s sister has a dog, and B took her for a walk:

Summer2017_Day03_006

Good Shabbos from Brodhead, Wisconsin!  See the alternating light blue line on the trip map for today’s drive.

Summer 2017, Day 2: Batter Up

This morning we had some equine neighbors:

Summer2017_Day02_001

Trish caught me chatting with the neighbors on her way back from shopping at “our” Walmart.  The horse trailer was being driven by a woman from Grants Pass, Oregon, and the fifth-wheel hitched to the red truck was a family from Dutchess County, New York, about an hour north of our house:

Summer2017_Day02_002

We continued East and visited baseball bat manufacturer BWP Bats for a factory tour:

Summer2017_Day02_003

Their office featured memorabilia from players who use (or used) their bats:

Summer2017_Day02_004

Summer2017_Day02_005

Summer2017_Day02_006

The first step of the process uses a computerized CNC lathe to convert a cylinder of wood, called a billet, into a bat in about 3 minutes:

Summer2017_Day02_009

We learned that baseball bats have a fixed relationship between length and weight (called bad drop) that is determined by whether the bat is used for professional, college, or little league play.  We also learned about “cupping”, which is drilling out the end of a bat to make it slightly lighter. The handle end of the bat can be terminated in a variety of shapes depending on the player’s preference:

Summer2017_Day02_010
Once the bat is formed, it’s sanded and the ends are cut off:

Summer2017_Day02_011

Next we went downstairs and saw the painting process which involves dipping the bats into paint one or more times depending on the color scheme.  After being hung to dry, the BWP sticker is applied and the bat is dipped multiple times into a clear polyurethane finish before it’s finished:

Summer2017_Day02_007

This machine applies a narrow band of black paint over the seam between two colors added during the dipping process:

Summer2017_Day02_008

We continued east to overnight at the Walmart of Van Wert, Ohio.  Getting gas is always a tricky affair when you’re 62 feet long and 13 feet, 6 inches tall: 

Summer2017_Day02_012

There were plenty of trucks in the parking lot and it was another loud night as the trucks were running their APUs to power their air conditioners to keep the sleeper units in the trucks cool. It was 75 degrees and 99% humidity, so it was pretty uncomfortable. We decided to put out our generator so we could run the air conditioner overnight. It was no problem, since the trucks were making so much noise that generator just Blended right in:

Summer2017_Day02_013

See the alternating light blue line on the trip map for today’s drive.

Summer 2017, Day 1

After spending the last few days getting everything ready, by late afternoon we were ready to go:

Summer2017_Day01_001

We drove South and then East through New Jersey, ultimately arriving at the Walmart of Hazleton, Pennsylvania:

Summer2017_Day01_002

It was a warm night, so we opened all the windows and tried to go to sleep.  Nearby semi trucks ran their APUs to power their air conditioners, and semi trucks would come and go during the night, so it wasn’t a restful night.

See the alternating light blue line on the trip map to see today’s drive.